Blackberry Mobile Phone Battery Transmit Power Is Small, Power Saving
Mobile phone Battery For Blackberry Just get the battery may wish to use a toothpick to clean the battery contact point, remove the electrode surface coating, to ensure good contact. (NOKIA card type batteries such as N82 N81 5700 6110N do not need to deal with, when the card has self-cleaning)
First use the battery to the natural shutdown, then the first three to fully charge and discharge, to use the natural shutdown, and then with the original direct charge in the phone boot to full, and then continue to charge about 1-2 hours. The battery is idle for a period of time and can be activated using this method.
Daily use:
Daily use, full can, do not charge for a long time, otherwise it will affect life. But also with the charge with the use of alarm or shutdown. Note that the use of the battery as soon as possible to shut down the battery, or the battery self-discharge, the voltage continues to decline may lead to self-locking protection can not charge.
To develop habits: day to the unit, at home,Mobile Battery For Blackberry began to charge, filled or left, before going to bed unplug the power.
More battery storage:
Keep the battery in half charge (50% half charge). Residual pressure is too low, long-term storage due to self-discharge to the battery voltage below 2.75V will affect the battery life, fall to 2.2V below the "dead zone" or even a sleep and scrapped. And full power, the battery material is active,Mobile Battery For Blackberry exacerbate aging and self-discharge, the same will affect life. So the general new battery there is a certain amount of electricity.
The battery is placed after a period of time into the sleep state, then the capacity is lower than normal, the use of time also will be shortened. After 3-5 times the charge can activate the battery, restore normal capacity.
Original power + mobile phone. The original power supply provides a stable output,Mobile Battery For Blackberry the phone circuit has a control circuit, and the system software has a more detailed, more accurate regulation.
Original power supply + split charge. The original power supply provides a stable output, the cradle control circuit can also effectively play a regulatory role.
Universal charge, egg red is the cell phone battery killer, is not recommended. Think about the cost of such a point to complete the output, control function, is not it ridiculous?
Capacity and Standby Standby Time Influencing factors:
1. mobile phone models, specific mobile phone individual power consumption, mobile phone parameter settings
2. SIM card chip process (1.8V process sim card power consumption is only conventional 3V process sim card 1/3)
3. mobile phone location signal strength; strong signal, and the base station from the near, mobile phone and base station communication power is small, power
5. Battery capacity, quality, service life;
6. Ambient temperature (near zero at low temperature capacity will drop, in 25 ℃ ~ 40 ℃ environment will show excellent performance)
First use the battery to the natural shutdown, then the first three to fully charge and discharge, to use the natural shutdown, and then with the original direct charge in the phone boot to full, and then continue to charge about 1-2 hours. The battery is idle for a period of time and can be activated using this method.
Daily use:
Daily use, full can, do not charge for a long time, otherwise it will affect life. But also with the charge with the use of alarm or shutdown. Note that the use of the battery as soon as possible to shut down the battery, or the battery self-discharge, the voltage continues to decline may lead to self-locking protection can not charge.
To develop habits: day to the unit, at home,Mobile Battery For Blackberry began to charge, filled or left, before going to bed unplug the power.
More battery storage:
Keep the battery in half charge (50% half charge). Residual pressure is too low, long-term storage due to self-discharge to the battery voltage below 2.75V will affect the battery life, fall to 2.2V below the "dead zone" or even a sleep and scrapped. And full power, the battery material is active,Mobile Battery For Blackberry exacerbate aging and self-discharge, the same will affect life. So the general new battery there is a certain amount of electricity.
The battery is placed after a period of time into the sleep state, then the capacity is lower than normal, the use of time also will be shortened. After 3-5 times the charge can activate the battery, restore normal capacity.
Original power + mobile phone. The original power supply provides a stable output,Mobile Battery For Blackberry the phone circuit has a control circuit, and the system software has a more detailed, more accurate regulation.
Original power supply + split charge. The original power supply provides a stable output, the cradle control circuit can also effectively play a regulatory role.
Universal charge, egg red is the cell phone battery killer, is not recommended. Think about the cost of such a point to complete the output, control function, is not it ridiculous?
Capacity and Standby Standby Time Influencing factors:
1. mobile phone models, specific mobile phone individual power consumption, mobile phone parameter settings
2. SIM card chip process (1.8V process sim card power consumption is only conventional 3V process sim card 1/3)
3. mobile phone location signal strength; strong signal, and the base station from the near, mobile phone and base station communication power is small, power
5. Battery capacity, quality, service life;
6. Ambient temperature (near zero at low temperature capacity will drop, in 25 ℃ ~ 40 ℃ environment will show excellent performance)
评论
发表评论